VOLTAGE DISPLAY GREEN 6-73V / 7-100V

Product Code: WM0001901

Price

10,80€

– +

In Stock Delivery in 4-6 business days

Description

Description

Digital battery charge level and voltage indicator

Specification:
Voltage range: 6V - 73V / 7V - 100V
Material: plastic
Dimensions: 61.3 mm x 33.3 mm x 13.5 mm
Wire length: 30 cm
Housing color: black

The indicator is intended for lead-acid batteries with nominal voltages of 12V, 24V, 36V, 48V (8-70V) and for 3.7V lithium cell batteries.

Operating modes:
S1 - The charge-level indicator alternately displays the charge level and the current voltage in a 2-second cycle.
S2 - The indicator turns on for 10 seconds after pressing the button and then turns off to save energy.
S3 - The indicator backlights when the button is pressed.
S4 - The indicator displays a logo (applies to the mode with the small battery icon). The logo icon is placed under the battery symbol on the left side of the display. Turn on to display the logo.
S5 - Selection of discharge mode. Displays two types of battery discharge curves. Different conditions are transformed to determine the appropriate discharge mode.

Entering settings:
1. Disconnect the module from the power supply. Press and hold the settings button, reconnect the power and release the button. The display will show the current setting parameters.
2. Press the settings button in the sequence P / L / F (P - lead-acid battery 12V, L - lithium cell 3.7V, F - LiFePo cell 3.2V).
3. Press the function button to set the number of cells in the battery.
4. Press and hold the function button for an extended time to enter advanced settings mode. Use the settings button to select among S1-S5. Confirm with the Enter button to select or cancel the current mode.
5. Reconnect the power after making settings. Settings will be saved automatically.

For example: Mode S1 (alternately displaying charge status and voltage) for a 10-cell lithium battery - Disconnect the power, press and hold the settings button, reconnect the power, briefly press the settings button selecting L,
press the button to choose 10, press and hold the function button to select S1 and connect to the power supply.